Step Repair

Step Repair

Creaking Stair Repair

Silencing creaky treads by refixing wedges, adding glue blocks and screwing treads to risers, from above or below the stairs.

Free Step Repair quote

No obligation. We only use your details to reply about this job.

Creaking Stair Repair — Step Repair

What's involved

Stairs creak when timber rubs against timber: a tread moving on a riser, a wedge loosening in the string housing or a glue block that has dropped off. The best fix is from underneath. If the underside is open or can be accessed through a cupboard, the joiner re-glues and drives home the wedges, fits new glue blocks along each tread-to-riser joint and adds screws through the riser into the back of the tread. Where the underside is plastered, the fix is done from above by lifting carpet and screwing the tread down into the riser with countersunk screws, then plugging the holes. A full flight typically takes two to four hours. You need to clear the stairs and, if the fix is from above, have the carpet lifted or let the fitter do it.

How we handle it

  1. Tell us about the steps

    Use the quote form to say whether the steps are inside or outside, what they are made of and what is wrong. Photos showing the damage and the whole flight help.

  2. Diagnose the cause

    A local tradesperson checks why the step failed, such as loose wedges, frost damage, failed mortar or a sinking base, and gives you a fixed price.

  3. Prepare and make safe

    Loose material is removed, surfaces are cleaned back to sound timber, concrete, stone or brick, and an alternative route is arranged if needed.

  4. Repair or replace

    Treads are refixed or replaced, concrete is built up or recast, stone is rebedded and brick is rebuilt, keeping the rise and nosing consistent.

  5. Cure, finish and check

    Repairs are left to set, finishes are matched where possible and the tradesperson checks every step for movement before handing over.

Price guide

Step repair costs depend on the material, the number of steps and whether the cause is a surface problem or a failed base. Fixing a creaky stair is a short job, while rebuilding a flight of stone steps takes days. We give a fixed price after photos or a visit, including materials and making good.

  • Concrete step edge repair: £150–£400. Rebuilding chipped or crumbling nosings on one to three steps with repair mortar.
  • Replace a broken stair tread: £150–£350. New tread cut to match, fitted and fixed; carpet or finishing may be extra.
  • Creaking stair fix, full flight: £120–£280. Re-gluing wedges, adding glue blocks and screwing treads, from above or below.

Questions about creaking stair repair

How do you fix a creaky stair?

A creaky stair is fixed by stopping timber parts rubbing together. From underneath, the wedges are re-glued and driven home and glue blocks are added between tread and riser. From above, the tread is screwed down into the riser with countersunk screws. Lubricants and powder only mask the noise briefly.

How much does it cost to repair stairs?

Fixing a creaky flight usually costs £120 to £280. Replacing a single broken tread is typically £150 to £350. External repairs vary more: rebuilding concrete step edges costs £150 to £400, resetting stone steps £300 to £900, and rebuilding a flight of brick steps £800 to £2,200.

Can one stair tread be replaced?

Yes. A single tread can be replaced without rebuilding the staircase. If the underside is open, the tread is slid out after the wedges are removed. If it is plastered, the tread is cut out in pieces and the new one fitted from above. Matching the thickness and nosing profile is the key to a neat result.

Get a free step repair quote

Tell us what you need and we'll come back with a clear price.

Request a quote