Step Repair

Step Repair glossary

The terms you'll come across, explained in plain English.

Curing
The period after casting when concrete or mortar gains strength, which must be protected from frost and rapid drying.
Frost-resistant brick
A brick designed to withstand repeated freezing and thawing when wet, used for exposed steps, copings and paving.
Glue block
A small triangular block of timber glued into the angle between a tread and riser to stop them moving and creaking.
Lime mortar
A traditional mortar made with lime rather than cement, softer and more breathable, used for bedding and pointing older stone and brick.
Nosing
The front edge of a tread, which takes the most wear and impact and is often the first part of a step to chip or break.
Repair mortar
A specially formulated mortar, often polymer-modified, used to rebuild damaged concrete edges and surfaces with good bond and strength.
Riser
The vertical face between two treads. Consistent riser heights make steps safer to use.
Shuttering
Temporary timber or board formwork that holds wet concrete or repair mortar in shape until it sets.
Spalling
Flaking or breaking away of the surface of concrete, brick or stone, usually caused by water freezing and expanding inside it.
Stone indent
A repair where a damaged section of stone is cut out and replaced with a matching piece fixed into place.
String
The side board of a timber staircase that supports the ends of the treads and risers, either closed or cut to the step profile.
Sub-base
A compacted layer of crushed stone beneath a concrete or paved step that spreads load and provides drainage.
Tread
The horizontal surface of a step that you stand on, in timber, concrete, stone or brick.
Wedge
A tapered piece of timber glued and driven into the string housing beneath a tread or riser to lock it in place.
Winder
A tapered tread used where a staircase turns a corner, wider at one end than the other.

Get a free step repair quote

Tell us what you need and we'll come back with a clear price.

Request a quote