Step Repair

Step Repair

Brick Step Repair

Replacing spalled bricks, repointing joints and rebuilding brick steps and risers with frost-resistant bricks and copings.

Free Step Repair quote

No obligation. We only use your details to reply about this job.

Brick Step Repair — Step Repair

What's involved

Brick steps fail when ordinary bricks absorb water and the faces blow off in frost. The bricklayer cuts out damaged bricks and replaces them with frost-resistant engineering bricks or a closely matched facing brick rated for paving use. Joints are raked out and repointed. Treads often have a brick-on-edge or bullnose brick nosing, which is reset on a fresh mortar bed. Where the steps have moved because the foundation is shallow, the bricklayer breaks out and rebuilds them on a proper concrete base. Small repairs take half a day; rebuilding a flight takes two to three days. You need to choose whether to match existing bricks or upgrade to a harder-wearing brick, and keep off the steps until the mortar has set.

How we handle it

  1. Tell us about the steps

    Use the quote form to say whether the steps are inside or outside, what they are made of and what is wrong. Photos showing the damage and the whole flight help.

  2. Diagnose the cause

    A local tradesperson checks why the step failed, such as loose wedges, frost damage, failed mortar or a sinking base, and gives you a fixed price.

  3. Prepare and make safe

    Loose material is removed, surfaces are cleaned back to sound timber, concrete, stone or brick, and an alternative route is arranged if needed.

  4. Repair or replace

    Treads are refixed or replaced, concrete is built up or recast, stone is rebedded and brick is rebuilt, keeping the rise and nosing consistent.

  5. Cure, finish and check

    Repairs are left to set, finishes are matched where possible and the tradesperson checks every step for movement before handing over.

Price guide

Step repair costs depend on the material, the number of steps and whether the cause is a surface problem or a failed base. Fixing a creaky stair is a short job, while rebuilding a flight of stone steps takes days. We give a fixed price after photos or a visit, including materials and making good.

  • Concrete step edge repair: £150–£400. Rebuilding chipped or crumbling nosings on one to three steps with repair mortar.
  • Replace a broken stair tread: £150–£350. New tread cut to match, fitted and fixed; carpet or finishing may be extra.
  • Creaking stair fix, full flight: £120–£280. Re-gluing wedges, adding glue blocks and screwing treads, from above or below.

Questions about brick step repair

How much does it cost to repair stairs?

Fixing a creaky flight usually costs £120 to £280. Replacing a single broken tread is typically £150 to £350. External repairs vary more: rebuilding concrete step edges costs £150 to £400, resetting stone steps £300 to £900, and rebuilding a flight of brick steps £800 to £2,200.

How do you repair crumbling concrete steps?

Loose concrete is cut back to a sound base, cleaned, primed with a bonding agent and rebuilt with polymer-modified repair mortar inside timber shuttering. Deep repairs are pinned with stainless or galvanised steel. If the step has sunk or the damage is widespread, breaking out and recasting is more reliable than patching.

Should I use cement or lime to repair old stone steps?

Lime mortar is usually the right choice for old stone steps, especially soft sandstone and limestone. Lime is more flexible and breathable, so moisture escapes through the joints instead of the stone. Hard cement mortar traps water, which can make the stone spall and crack faster.

Get a free step repair quote

Tell us what you need and we'll come back with a clear price.

Request a quote