Step Repair

Step Repair

Broken Tread and Nosing Repair

Replacing split or cracked stair treads and damaged nosings, cut to match the existing stair and fixed securely.

Free Step Repair quote

No obligation. We only use your details to reply about this job.

Broken Tread and Nosing Repair — Step Repair

What's involved

A cracked tread or a split nosing is a fall risk and should be fixed quickly. Small splits in a nosing can sometimes be glued and clamped, but a broken tread usually needs replacing. On a stair with an open underside, the joiner knocks out the wedges, slides the old tread out of the string housings and fits a new one cut from pine, oak or MDF to match the thickness, nosing profile and width. Where the stair is closed underneath, the tread is cut out in sections and a new one fitted from above, glued and screwed. A single tread takes two to four hours. You need to say what the stair is finished with, carpet, paint or bare timber, so the replacement can be matched or covered.

How we handle it

  1. Tell us about the steps

    Use the quote form to say whether the steps are inside or outside, what they are made of and what is wrong. Photos showing the damage and the whole flight help.

  2. Diagnose the cause

    A local tradesperson checks why the step failed, such as loose wedges, frost damage, failed mortar or a sinking base, and gives you a fixed price.

  3. Prepare and make safe

    Loose material is removed, surfaces are cleaned back to sound timber, concrete, stone or brick, and an alternative route is arranged if needed.

  4. Repair or replace

    Treads are refixed or replaced, concrete is built up or recast, stone is rebedded and brick is rebuilt, keeping the rise and nosing consistent.

  5. Cure, finish and check

    Repairs are left to set, finishes are matched where possible and the tradesperson checks every step for movement before handing over.

Price guide

Step repair costs depend on the material, the number of steps and whether the cause is a surface problem or a failed base. Fixing a creaky stair is a short job, while rebuilding a flight of stone steps takes days. We give a fixed price after photos or a visit, including materials and making good.

  • Reset loose stone steps: £300–£900. Lifting and rebedding several stone treads, using lime mortar on older properties.
  • Recast concrete step: from £350. Breaking out and recasting a failed step on a prepared base with new shuttering.
  • Concrete step edge repair: £150–£400. Rebuilding chipped or crumbling nosings on one to three steps with repair mortar.

Questions about broken tread and nosing repair

How much does it cost to repair stairs?

Fixing a creaky flight usually costs £120 to £280. Replacing a single broken tread is typically £150 to £350. External repairs vary more: rebuilding concrete step edges costs £150 to £400, resetting stone steps £300 to £900, and rebuilding a flight of brick steps £800 to £2,200.

Can one stair tread be replaced?

Yes. A single tread can be replaced without rebuilding the staircase. If the underside is open, the tread is slid out after the wedges are removed. If it is plastered, the tread is cut out in pieces and the new one fitted from above. Matching the thickness and nosing profile is the key to a neat result.

How do you repair crumbling concrete steps?

Loose concrete is cut back to a sound base, cleaned, primed with a bonding agent and rebuilt with polymer-modified repair mortar inside timber shuttering. Deep repairs are pinned with stainless or galvanised steel. If the step has sunk or the damage is widespread, breaking out and recasting is more reliable than patching.

Get a free step repair quote

Tell us what you need and we'll come back with a clear price.

Request a quote