Step Repair

Step Repair

Concrete Step Repair

Fixing cracked, spalled and chipped concrete steps with repair mortars, new nosings or recasting the damaged section.

Free Step Repair quote

No obligation. We only use your details to reply about this job.

Concrete Step Repair — Step Repair

What's involved

External concrete steps crack and crumble as water gets in, freezes and expands. Edges break off first, leaving rounded, dangerous nosings. The tradesperson cuts back loose concrete to a sound base, cleans it, applies a bonding primer and builds the step back up using a polymer-modified repair mortar, using timber shuttering to form a crisp edge. Deep damage may need steel pins drilled in for reinforcement. If a whole step has failed or the flight has sunk, the section is broken out and recast with new shuttering and a properly prepared base. Small repairs cure for 24 hours before use; recast steps need several days. You need an alternative route in or out while the repair cures, and dry weather above freezing for the work.

How we handle it

  1. Tell us about the steps

    Use the quote form to say whether the steps are inside or outside, what they are made of and what is wrong. Photos showing the damage and the whole flight help.

  2. Diagnose the cause

    A local tradesperson checks why the step failed, such as loose wedges, frost damage, failed mortar or a sinking base, and gives you a fixed price.

  3. Prepare and make safe

    Loose material is removed, surfaces are cleaned back to sound timber, concrete, stone or brick, and an alternative route is arranged if needed.

  4. Repair or replace

    Treads are refixed or replaced, concrete is built up or recast, stone is rebedded and brick is rebuilt, keeping the rise and nosing consistent.

  5. Cure, finish and check

    Repairs are left to set, finishes are matched where possible and the tradesperson checks every step for movement before handing over.

Price guide

Step repair costs depend on the material, the number of steps and whether the cause is a surface problem or a failed base. Fixing a creaky stair is a short job, while rebuilding a flight of stone steps takes days. We give a fixed price after photos or a visit, including materials and making good.

  • Recast concrete step: from £350. Breaking out and recasting a failed step on a prepared base with new shuttering.
  • Concrete step edge repair: £150–£400. Rebuilding chipped or crumbling nosings on one to three steps with repair mortar.
  • Replace a broken stair tread: £150–£350. New tread cut to match, fitted and fixed; carpet or finishing may be extra.

Questions about concrete step repair

How much does it cost to repair stairs?

Fixing a creaky flight usually costs £120 to £280. Replacing a single broken tread is typically £150 to £350. External repairs vary more: rebuilding concrete step edges costs £150 to £400, resetting stone steps £300 to £900, and rebuilding a flight of brick steps £800 to £2,200.

How do you repair crumbling concrete steps?

Loose concrete is cut back to a sound base, cleaned, primed with a bonding agent and rebuilt with polymer-modified repair mortar inside timber shuttering. Deep repairs are pinned with stainless or galvanised steel. If the step has sunk or the damage is widespread, breaking out and recasting is more reliable than patching.

Should I use cement or lime to repair old stone steps?

Lime mortar is usually the right choice for old stone steps, especially soft sandstone and limestone. Lime is more flexible and breathable, so moisture escapes through the joints instead of the stone. Hard cement mortar traps water, which can make the stone spall and crack faster.

Get a free step repair quote

Tell us what you need and we'll come back with a clear price.

Request a quote